ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

View previous topic View next topic Go down

ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

Post by FASFOX89 on Sat Jul 02, 2011 10:41 am

would like a cobra intake,65 0r 70mm TB.,24# injectors with matching tube,shorty headers,off road hpipe..i need a little pep in my step..anyone have anything for me?? thanx all,Scott

FASFOX89
BOSS
BOSS

Number of posts: 326
Age: 52
Location: Harford county,HdG
Registration date: 2011-06-05

View user profile

Back to top Go down

Re: ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

Post by mjr46 on Sat Jul 02, 2011 2:17 pm

pep in your step??? bypass all those oem parts and step it up a notch, look for some tfs tw heads, holley systemax intake, match tb to intake opening and 75-80mm maf, as for cam tfs 1 or 2 if ots is your thing but custom if you can stomach the extra beans and have supporting mods such as exhaust and gears and 24's should work but upgrade FP if it is still the stock 88lph........all the above parts can be had at decent used prices on the corral.net if you patiently search.........I did just the above only with Edelbrock components and a custom cam and had all for under 1500.00 and on stock suspension car ran low to mid 12's with NO tune, add suspension and the fun begins Smile


Last edited by mjr46 on Sat Jul 02, 2011 4:22 pm; edited 2 times in total

mjr46
BOSS
BOSS

Number of posts: 482
Age: 36
Location: Maryland
Registration date: 2008-02-16

View user profile

Back to top Go down

Re: ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

Post by FASFOX89 on Sat Jul 02, 2011 2:21 pm

yeah..i know

FASFOX89
BOSS
BOSS

Number of posts: 326
Age: 52
Location: Harford county,HdG
Registration date: 2011-06-05

View user profile

Back to top Go down

Re: ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

Post by Maui Built on Sat Jul 02, 2011 8:55 pm

I agree with mjr46. I went the Edelbrock route with the performer 2.0/1.6 heads/Upper, harland sharp rollers, 70mmTB, 24#injectors, mild E303 cam, Equal shorty headers, Pypes X pipe, Flowmaster 40 series duals, underdrive pulleys, MSD 6AL ignition/coil/wires, Motorvation chip. A cheap bang for your buck are gears. Utilize that mechanical advantage.

Then the suspension mods make it really fun to carve....I went with Hotchkiss adjustable caster/camber plates, strange engineering 10 way adjustable gas dampers, KYB axle dampers, Energy suspension urethane bushings and aftermarket control arms, BBK frame rails. This really made it handle like a slot car. It all comes down to the Benjamins my friend Then Holley Systemax is a great component set as well as the Trick Flow setups. Just ask around or look on the forums/Mustang websites/mags....you don't have to reinvent the wheel to get a nice running ride as others have already blazed the trail for ya. Good luck!

Maui Built
GT
GT

Number of posts: 125
Age: 45
Location: LaVale, Maryland
Registration date: 2010-02-23

View user profile

Back to top Go down

Re: ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

Post by FASFOX89 on Sat Jul 02, 2011 11:10 pm

exhaust and gears for starters and then a new top

FASFOX89
BOSS
BOSS

Number of posts: 326
Age: 52
Location: Harford county,HdG
Registration date: 2011-06-05

View user profile

Back to top Go down

Re: ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

Post by RTW0223 on Sat Jul 02, 2011 11:24 pm

gears!!!

RTW0223
SUPER SNAKE
SUPER SNAKE

Number of posts: 1451
Age: 20
Location: Bel Air, MD
Registration date: 2008-10-19

View user profile

Back to top Go down

Re: ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

Post by Boss281 on Sun Jul 03, 2011 8:25 am

My son has been getting rid of our entire Fox Body inventory collected over the years (as well as the cars). I haven't talked with him in a while about it but let me see what's left.

_________________

Torch Red 2005 Mustang GT 5-speed
All motor, stock shortblock and heads, aftermarket cams and intake manifold, full exhaust, 361hp/324trq, 11.89 at 115
Kona Blue 2011 Mustang GT 6-speed
Wheels and tires, springs, GT500 exhaust, BOSS Intake, CAI and tune, o/r h-pipe, 399hp/358trq, daily driver.

Boss281
Geek Stangs
Geek Stangs

Number of posts: 1525
Age: 54
Location: New Windsor
Registration date: 2007-12-06

View user profile http://www.cardomain.com/ride/2059455

Back to top Go down

Re: ok... i need some bolt ons for my damn near bone stock Fox body..need some pep in my step:)

Post by FASFOX89 on Sun Jul 03, 2011 8:31 am

thanx a lot !!!

FASFOX89
BOSS
BOSS

Number of posts: 326
Age: 52
Location: Harford county,HdG
Registration date: 2011-06-05

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum