87-93 GT fog lights

ok ...i put some aftermarket foggers in the holes in the front of the 89 GT vert...at 1st hook up the passenger side worked and the driver side didn't..after a little cleaning i get both sides working...ok ..about a few days later was gonna take her out at night and check out both lights...now the passenger side is not working and the driver's side is????? where to check next...could i just cut the plugs and hard wire the wires or should i cut the wires and do a once over on the the connectors....thought ,ideas ...tips...thanx

probably corrosion in the connectors, but honestly after you fix that, you might want to rewire the fog lights so they aren't running power throught the switch, there was a tsb back in the day about issues with such and melting wires, I use the switch to control a relay on mine

thanx!!! I found this article...is this how you did yours?
http://www.corral.net/tech/maintenance/foglights.html

yea thats a good idea to re wire those things before you go out one night and your headlights quit working. i didnt do mine at all im going to remove them

that article will work, all I remember is all my switch does now is control a ground for the relay