Flashing my mustang
Page 1 of 1•
Flashing my mustang
Here are my spec for my stang 95-gt 5-speed, Vortech V-1 Supercharger about 5 pound of boost, 410s gears, cobra upper and lower intake, 255 fuel pump and H-pipe no cats. Not tuned yet. what do i need to do next. I dont race except when someone wants to test me.
Re: Flashing my mustang
Def get a tune, any idea what #'s you're putting down? Turn up the boost too. 
Big B
92 LX NOTCH

DRIVE IT LIKE YOU STOLE IT!
ROTM 07/08
92 LX NOTCH

DRIVE IT LIKE YOU STOLE IT!
ROTM 07/08
Re: Flashing my mustang
I paid about 700 bux. That included an SCT custom burned multi tune chip, installation and dyno time. I used JJ from Woodbine Motorsports. He did a great job. Here's a link to his site.
Check him out.
Check him out.
Big B
92 LX NOTCH

DRIVE IT LIKE YOU STOLE IT!
ROTM 07/08
92 LX NOTCH

DRIVE IT LIKE YOU STOLE IT!
ROTM 07/08
Re: Flashing my mustang
Thanks for the infor. Hey a few quick questions. Before i get it tuned do you think i should get my bbk headders first? IF so which ones shorties or long tubes.
Re: Flashing my mustang
I would def change the headers first. I have BBK ceramic coated shorties. I didn't want to buy 2 h pipes so I stayed w/ the shorties.
Big B
92 LX NOTCH

DRIVE IT LIKE YOU STOLE IT!
ROTM 07/08
92 LX NOTCH

DRIVE IT LIKE YOU STOLE IT!
ROTM 07/08
Re: Flashing my mustang
theres a very wide selection of 302 cams out there and probably ones that would work alot better with boost then stock.
did the '95 GT's have the GT40 heads or was that only the cobras?
did the '95 GT's have the GT40 heads or was that only the cobras?
-Tony


Re: Flashing my mustang
I got the cobra upper and lowers from a 94 cobra. i Hve checked with cam makers and i will have to get a cam cut for my blower. Also i was thinking of going with the BBK headders first







